-
Maintenance of TO-1, TO-2, EO equipment is the regulations that determine the frequency and volume of maintenance of technological equipment.
Industrial equipment, like any other, needs timely maintenance, as only in this case you can guarantee the smooth operation of the enterprise. Forced downtime turns into huge costs. To avoid such overlays allows timely maintenance.
Maintenance tasks
The maintenance procedure is carried out at the frequency recommended by the manufacturer. In fact, it is a preventive measure designed to protect the production site from downtime. Scheduled maintenance is carried out in accordance with an approved schedule and includes a standard set of operations, repeated over and over again.
The company “Sintez TMK” recommends regular care of the condition of the equipment and offers the following services:- Regular inspection, constant monitoring of equipment performance, which can be carried out once a day, week, month;
- The scheduled maintenance provided by the technical documentation for the equipment usually includes the replacement of oil and consumables;
- Emergency services caused by equipment breakdown.
Specialists take care of maintaining the equipment in good condition, conduct inspection, adjustment, and other required manipulations.
The workshop uses equipment for various purposes, differing in principle of operation and design. To be well versed in the maintenance of equipment, you need to have knowledge about a particular machine, and the mechanic responsible for the work of the shop, it is difficult to keep track of constantly updated equipment. In order not to maintain a large staff of narrowly focused masters for the maintenance of specific equipment, It is easier to entrust its service to a professionally engaged, equipment, company.
At Sintez TMK, employees follow new equipment and are constantly trained to work with new equipment. People who are able to assemble the unit from scratch are well versed in its design and immediately notice problems in the work. Such specialists will ensure the maintenance of the equipment and timely conduct routine or repair work.
All specialists have the necessary permits. The work performed is guaranteed, and the price is much lower than the payment of an additional full-time employee. Even if the documentation for the equipment is lost, our specialists will be able to restore it.
Depending on the timing and scope of work, the Regulations provide for the following types and frequency of maintenance:
- Daily (shift) maintenance (EO) - once a day (shift);
- Maintenance 1 (TO-1) - for each type of equipment, usually once a month (includes EO);
- Maintenance 2 (TO-2) - for each type of equipment, as a rule, after 6 months (includes EO, TO-1).
The main purpose of EO is a general visual control of the technical condition and appearance of equipment and structures, aimed at ensuring trouble-free (emergency-free) their work.
The main purpose of TO-1 and TO-2 is to reduce the intensity of wear of parts, identify faults and prevent failures due to the timely replacement of some components of products, conducting control and diagnostic, lubricating, fastening, adjusting and other work performed, as a rule, without disassembling products and removing their individual components.
Maintenance of the EO, TO-1 and TO-2 main structures and technological equipment is carried out by the personnel of the fuel service, except for works that must be performed by other services in accordance with current documents.
Maintenance activities
You can order the following types of industrial equipment maintenance:
- Current. It includes inspection and control of the equipment with a given regularity (every shift, daily, etc.);
- Planned. Performed according to technical specifications, passports of specific industrial equipment. Examples of scheduled maintenance are: replacement of oil, filters, components, etc.
- Emergency. The need for it arises spontaneously when equipment breaks down. The reasons are often errors in operation, hidden defects of individual components, parts, structures and other reasons.
The first two types of service can be provided on a planned basis, when both the customer and our specialists know in advance when, to what extent and what operations will be performed at the client’s enterprise.
Emergency services cannot be planned and predicted, but You can apply for emergency service at any time, we guarantee the shortest possible time.
In the company “Sintez TMK” you can order maintenance of the following categories of industrial equipment:
– Black and non-ferrous metallurgy
– Mining industry
– Refining industry
– Oil industry
– Heavy and light engineering
– Chemical industry
– Petrochemical industry
– Oil and gas industry
Benefits of Contacting UsBy ordering service in the company “Sintez TMK”, our customers enjoy the following advantages:
- Experience of specialists in each area of industrial production.
- If the technical documentation for industrial equipment is lost, we will help restore it and, if necessary, develop it again.
- All types of services are carried out under a contract with the provision of a guarantee.
- We guarantee real prices and offer mutually beneficial cooperation.
- All specialists have permits to work with industrial equipment, the company is a member of the SRO.