Foundation arrangement

From 14 days performance

Prevent premature wear and multi-ton – order the installation of foundations for equipment.

When supplying equipment, the manufacturer sends a detailed drawing of the construction assignment of the foundation, in which all the loads, sizes and plate-mounting bolts. Specialists of our company take into account important nuances during installation, comply with GOST standards and Follow the recommendations of manufacturers.

Not allow the connection of the foundation of the equipment with foundation – the concussion of the machine is transmitted to the load-bearing structures of the building and There may be uneven precipitation of the base.

Find out. Our video shows how the work progresses foundation

Determination of the permissible load on foundation

To determine the amount of pressure on ground We will perform geological surveys or use archival data of the site. When designing under an asymmetrical load, we first set the size of the foundation and check the pressure base for the equipment.

When determining the depth of the foundation, we take into account the level of groundwater, temperature, vibrations, assess the impact of the equipment foundations on the groundwater. building.

Company «TMK synthesis» specialize foundation-building

Trench foundations are necessary for one-time installation in till-shop the three lines of the line located on One flight parallel to each other. With a greater number of lines on In different spans, we recommend equipping the foundations of the floor type.

Fundamentals of machines with dynamically must be separated from related foundations of buildings, structures and through-sew equipment.

Trench foundations necessary for a single installation in till-shop the three lines of the line located on One flight parallel to each other. With a greater number of lines on In different spans, we recommend equipping the foundations of the floor type.

Combined and pillar provide concrete savings on compared wall trench foundations. They have a significant advantage. – facilitated access at the bottom of the presses.

production of large and medium-sized trenches They set up lines consisting of crank-press the upper drive (predominantly two) – and It’s four cranks.

In the presence of groundwater on Installation of industrial equipment using one of effective methods of soil drainage – water-reducing. To ensure the safety of buildings and protection Installation of water supply fences from wooden, reinforced concrete or metal piles.

needlefilter It is a pipe, on the At the end of which a filter is installed to prevent sand from getting inside and the soil when pumped water. Length and the diameter of the pipe depends on type of soil intended for drainage.

Each needle filter is installed in ground vertically filter downward and plug-in pump by means of a trunk pipeline made of metal pipes or rubber hoses. The main advantages of the pipeline are its strength, reliability of connections and The presence of an internal spiral to create a vacuum.